Canon MF7480 printer Driver, Firmware and User Manual free Download
Canon MF7480 printer come in and out of fashion and we are always updating our driver and software inventory to give you the latest updates. We also provide handy knowledge articles about wireless networks, utilities that simplify your life for easier network management. You can find these topics below.
Users enjoy the unique features of imageCLASS MF7480 printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon MF7480 printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/
Canon MF7480 Driver
– Canon MF7480 printer driver or Canon MF7480 print processors in a computer are the software that converts data to be printed into formats understood by computers and printers, allowing applications like word processing programs (which typically don't know anything about how specific models operate) do their jobs.
– At first glance, it is difficult to understand why anyone would need a driver that fixes Canon MF7480 printer errors and issues. However there are many reasons someone might have this installed on their computer–maybe they got one piece of paper stuck in the machine causing an "Paper Jam" error code while trying other things with Photoshop or Microsoft Office? Or maybe you were running low on ink so wanted try cleaning out some dirt inside before calling for help; either way if any type of problem arises users should know exactly where too find WIC utility reset chip (or hack adjustment programs) because finding them elsewhere will only lead more trouble later down road
Download Canon MF7480 Driver for Windows:
– Download Canon MF7480 Driver for Windows 11:
– Download Canon MF7480 Driver for Windows 10 64bit:
– Download Canon MF7480 Driver for Windows 10 32bit:
– Download Canon MF7480 Driver for Windows 8 64bit:
– Download Canon MF7480 Driver for Windows 8 32bit:
– Download Canon MF7480 Driver for Windows 7 64bit:
– Download Canon MF7480 Driver for Windows 7 32bit:
Download Canon MF7480 printer Driver for Mac OS:
– Download Canon MF7480 Driver for Mac OS 11.xx:
– Download Canon MF7480 Driver for Mac OS 10.xx:
Canon MF7480 Firmware
– The Canon MF7480 Firmware is an intermediary software developed by Canon company, which helps to interact between the software and the hardware of the printer with each other. It is used when printing from a computer or sending print jobs from one device to another via WiFi Direct/Ethernet direct connection.
– Canon MF7480 needs to be refilled by the the original firmware when the printer components are unstable or the printer went wrong with the teachnical error or firmware errors. By that time, you need a technician or experienced person to fix Canon MF7480 and diagnose the problems for your printer.
– When Canon MF7480 printer goes wrong, there is no need to panic. With the help of its Canon MF7480 original firmware (or Canon MF7480 Firmware), you can fix your device and get back up on track quickly so that printing jobs aren not missed or delayed due an error with your machine’s components- which is why it needs regular refilling from time-to-time as well!
Download Original Canon MF7480 Firmware for Windows:
– Original Canon MF7480 Firmware for Windows:
Download Canon MF7480 Firmware for Mac OS:
– Original Canon MF7480 Firmware for Mac OS:
Canon MF7480 User Manual
– Canon MF7480 User Manual also called imageCLASS MF7480 User's Guide, which is provided by Epson company after you had purchasing a product.
– This Canon MF7480 printer guides include instructions such as basic disassembly of the printer, disassembly of the cartridge, instructions on choice of ink type, ink pump for printer and how to configure the printer to print via LAN /Wifi. It also has information about troubleshooting problems with printers and how to fix them yourself without having to call customer service.
– It's a great way to get your printer working again! This Canon MF7480 Manual will help you fix common errors and code when troubleshooting any problems with the machine, like it being unresponsive or producing bad quality prints.
I recommend printing this Canon MF7480 's document in case anything goes wrong while using one of our products at home so that there are no more headaches on top of everything else we've dealt with today — just make sure all tabs are turned up tight against each page before unfolding them (you don't want staples!).
Free watch and download Canon MF7480 User Manual
– Canon MF7480 User Manual for Windows:
– Canon MF7480 User Manual for MacOS:
[Quick guide] Fix Canon MF7480 error code list
– Code: E000-0001
– Description: Fixing temperature abnormal rise => The temperature detected by the main thermistor does not rise to the specified value during startup control.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector: J2063/J2510/J214, AC Connector: J105). 3. Replace the Fixing Main Thermistor (Film Unit). 4. Replace the Fixing Main Unit. 5. Replace the DC Controller PCB (UN2).
– Code: E001-0000
– Description: Fixing unit temperature rise detection => The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector: J2063/J2510/J214, AC Connector: J105). 3. Replace the Fixing Main Thermistor (Film Unit). 4. Replace the Fixing Main Unit. 5. Replace the DC Controller PCB (UN2).
– Code: E001-0001
– Description: Fixing unit temperature rise detection => The hardware circuit detects overheating of the main or sub thermistor for 30 msec.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Replace the DC Controller PCB (UN2).
– Code: E001-0002
– Description: Fixing unit temperature rise detection => The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector: J2063/J2510/J214, AC Connector: J105). 3. Replace the Fixing Main Thermistor (Film Unit). 4. Replace the Fixing Main Unit. 5. Replace the DC Controller PCB (UN2).
– Code: E002-0000
– Description: Fixing unit temperature insufficient rise => 1. The reading of the main thermistor is less than 115 deg C continuously for 400 msec 2.5 sec after it has indicated 100 deg C. 2. The reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector: J2063/J2510/J214, AC Connector: J105). 3. Replace the Fixing Main Thermistor (Film Unit). 4. Replace the Fixing Main Unit. 5. Replace the DC Controller PCB (UN2).
– Code: E003-0000
– Description: Low fixing temperature detection after standby => The reading of the main thermistor is less than 100 deg C continuously for 200 msec or more.
– Solutions: 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector: J2063/J2510/J214, AC Connector: J105). 3. Replace the Fixing Main Thermistor (Film Unit). 4. Replace the Fixing Main Unit. 5. Replace the DC Controller PCB (UN2).
– Code: E004-0000
– Description: Thermistor disconnection detection error => When disconnection is detected with connector for 30 sec continuously.
– Solutions: 1. Check connection of the Connector (J2063/J2510/J214). 2. Replace the Film Unit. 3. Replace the Fixing Main Unit. 4. Replace the DC Controller PCB (UN2).
– Code: E010-0001
– Description: Unstable rotation of the Main Motor (M1) => Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
– Solutions: 1. Check connection of the Connector (J2002/J2255/J203). 2. Replace the Main Motor (M1). 3. Replace the DC Controller PCB (UN2).
– Code: E010-0002
– Description: Unstable rotation of the Main Motor (M1) => During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
– Solutions: 1. Check connection of the Connector (J2002/J2255/J203). 2. Replace the Main Motor (M1). 3. Replace the DC Controller PCB (UN2).
– Code: E014-0001
– Description: Unstable rotation of the Fixing Motor (M2) => Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
– Solutions: 1. Check connection of the Connector (J2001/J203). 2. Replace the Fixing Motor (M2). 3. Replace the DC Controller PCB (UN2).
– Code: E014-0002
– Description: Unstable rotation of the Fixing Motor (M2) => During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
– Solutions: 1. Check connection of the Connector (J2001/J203). 1. Replace the Fixing Motor (M2). 2. Replace the DC Controller PCB (UN2).
– Code: E020-0000
– Description: The path between the sub hopper and the developing assembly is clogged with toner. => The Developing Assembly Toner Sensor (S25) detects the absence of toner, while the Sub Hopper Toner Sensor (S26) detects the presence of toner. With the Developing Cylinder Clutch (CL3) turned on, the hopper feed screw motor (M16) is rotated for 1 sec intermittently 194 times; still, the Developing Assembly Toner Sensor (S25) does not detect the presence of toner. * Error occurs after the delivery if a paper in passage exists.
– Solutions: 1. Check the rotation of hopper motor gear. (If rotating, false detection by the sensor is doubted. Feed the toner to the developing unit in service mode: COPIER > FUNCTION > INSTALL > TONER-S.) 2. Replace the Developing Assembly Toner Sensor (S25). 3. Replace the Sub Hopper Toner Sensor (S26). 4. Replace the DC Controller PCB (UN2).
Support fix printer solution and reset Canon MF7480:
– Telegram: https://t.me/hyperaktiv
– Facebook: https://www.facebook.com/dngnm
Related sources:
https://dnasofts.com/epson-driver/
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
https://nguyendangnam.com/epson-driver
https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/
Leave a Reply