Canon BJC-4300 printer Driver, Firmware and User Manual free Download

Canon BJC-4300 printer Driver, Firmware and User Manual free Download

The https://dnasofts.com/ site contains drivers for your Canon product, software to install the driver, manual recommendations, and wireless settings for various Canon models. To find out which drivers are compatible with your system or without driver software, click on the “Download” tab near the top of this page and scroll down until you see a list that identifies compatible operating systems. Once you have found the right OS and system-specific drivers for your Canon BJC-4300 printer, click on “Download” at top left side of screen to able download it onto your computer.
You are in luck because we offer downloads without any need for Canon BJC-4300 printer drivers! On our site with different pages such as Devices & Compatibility there is.
BJC-4300 Series is a sleek and stylish printer that has essential functions such as Wi-Fi, printing from anywhere with an internet connection or NFC tag on your phone (no more cables!), scanning documents to email them digitally right away – all without having to plug anything in! In addition it can produce up 4800 x 1200 dpi output quality making photos look crisp at any size. Two FINE cartridges are included: one black & white which produces 8 images per minute under ideal conditions; but only 5 for color prints every second when working quickly due their lower number of pixels per inch count vs other competitors.

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon BJC-4300 Driver

– Canon BJC-4300 printer driver is a great way to stay up-to date with your office's printing devices! You can monitor the warning signs that an ink cartridge needs changing, check out any errors during scanning photos from one side onto paper produced by another (blurred), and more.
– We all have those days where we just can't get our printer working, and it seems like there is an endless list of error code that the darn thing will give us when everything finally does work. This driver helps with these issues of Canon BJC-4300 by fixing "paper jam" or other problems related to your document feeder being full (which happens more often than you think!). But don't worry; these Canon BJC-4300 drivers won't let hackers into WIC utilities tool reset chip either!

Download Canon BJC-4300 Driver for Windows:

– Download Canon BJC-4300 Driver for Windows 11:

– Download Canon BJC-4300 Driver for Windows 10 64bit:

– Download Canon BJC-4300 Driver for Windows 10 32bit:

– Download Canon BJC-4300 Driver for Windows 8 64bit:

– Download Canon BJC-4300 Driver for Windows 8 32bit:

– Download Canon BJC-4300 Driver for Windows 7 64bit:

– Download Canon BJC-4300 Driver for Windows 7 32bit:

Download Canon BJC-4300 printer Driver for Mac OS:

– Download Canon BJC-4300 Driver for Mac OS 11.xx:

– Download Canon BJC-4300 Driver for Mac OS 10.xx:

Canon BJC-4300 Firmware

– When you use Canon BJC-4300 printer to print from a computer or sending jobs to another device, you need the Canon BJC-4300 's firmware. But if it gets stuck in an error state and can't be fixed by itself anymore then refilling with original Canon BJC-4300 firmware will come handy as this helps fix unstable components of your machine while diagnosing technical errors occurring on both hardware level with software related problems
– The package also includes all necessary tools that are used during these procedures so there isn't anything lost along
When printer errors, it can be frustrating to know what the cause of your problem may have been. Some people blame their computer and others believe that there is nothing wrong With them at all!The solution either way will involve trying different settings on both devices until you find one where everything works correctly again- or if none of these work try calling customer service for help resolving this issue as quickly as possible

Download Original Canon BJC-4300 Firmware for Windows:

– Original Canon BJC-4300 Firmware for Windows:

Download Canon BJC-4300 Firmware for Mac OS:

– Original Canon BJC-4300 Firmware for Mac OS:

Canon BJC-4300 User Manual

– Canon BJC-4300 printer's User Manual is a valuable tool for any individual who purchases or rents one of their products. It contains information about basic assembly, maintenance procedures like changing ink cartridges as well as troubleshooting tips if you're having trouble with your new device and need some assistance from the manufacturer before calling customer service!
– The Canon BJC-4300 Manual is a great way to troubleshoot any problem with your printer. You can use the instructions from one of these books, follow them carefully and fix errors code or common issues like: Canon BJC-4300 printer is unresponsive; bad print quality (color mixing/resolution); Canon BJC-4300 won't scan because there are too many paper jams in it – this will cause slow printing times (or even non-existent) plus you might get an error message when trying to start up cleanups mode etc.; if it was Wi-Fi enabled then make sure that both connections work by scanning again until everything shows �Online successfully connected”. After making certain all cables inside product connection settings match what they should do.

Free watch and download Canon BJC-4300 User Manual

– Canon BJC-4300 User Manual for Windows:

– Canon BJC-4300 User Manual for MacOS:

[Quick guide] Fix Canon BJC-4300 error code list

– Code: E001-0000
– Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
– Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E001-0001
– Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
– Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E001-0003
– Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
– Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0000
– Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0001
– Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0002
– Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0004
– Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
– Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E004-0000
– Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
– Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).

– Code: E004-0001
– Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
– Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.

– Code: E009-0000
– Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
– Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.

– Code: E009-0001
– Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
– Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.

– Code: E009-0002
– Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
– Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon BJC-4300:

– Telegram: https://t.me/hyperaktiv
– Facebook: https://www.facebook.com/dngnm

Related sources:
https://dnasofts.com/epson-driver/
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
https://nguyendangnam.com/epson-driver
https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/