Canon BJC-4200 printer Driver, Firmware and User Manual free Download

Canon BJC-4200 printer Driver, Firmware and User Manual free Download

As a Canon customer, you know that your device is difficult to use without official software. Luckily, we have got everything covered on the https://dnasofts.com/ website. Here you can find drivers for all of your Canon BJC-4200 printer products along with manual and wireless settings. Plus, our team provides information on compatibility with different operating systems so there's never another question about what will work best for you!
Users enjoy the unique features of BJC-4200 Series printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon BJC-4200 printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon BJC-4200 Driver

– Canon BJC-4200 printer driver or Canon BJC-4200 print processors in a computer are the software that converts data to be printed into formats understood by computers and printers, allowing applications like word processing programs (which typically don't know anything about how specific models operate) do their jobs.
– So, what's the point? It won't let them hack into Computer Utilities & Cracking Tools Resets Chips
– With all these hackers out there who can access any WIC utility tool reset chip or crack adjustment program that you may have. The best way would be via purchasing a license key from https://nguyendangnam.com/ so they only get their hands on those printer drivers which allow us to fix "paper jam" issues in our printers!

Download Canon BJC-4200 Driver for Windows:

– Download Canon BJC-4200 Driver for Windows 11:

– Download Canon BJC-4200 Driver for Windows 10 64bit:

– Download Canon BJC-4200 Driver for Windows 10 32bit:

– Download Canon BJC-4200 Driver for Windows 8 64bit:

– Download Canon BJC-4200 Driver for Windows 8 32bit:

– Download Canon BJC-4200 Driver for Windows 7 64bit:

– Download Canon BJC-4200 Driver for Windows 7 32bit:

Download Canon BJC-4200 printer Driver for Mac OS:

– Download Canon BJC-4200 Driver for Mac OS 11.xx:

– Download Canon BJC-4200 Driver for Mac OS 10.xx:

Canon BJC-4200 Firmware

– The Canon BJC-4200 printer Firmware is an intermediary software developed by Canon company, which helps to interact between the computer and hardware with each other. It's used when printing from a computer or sending jobs over WiFi Direct/Ethernet direct connection.
– For this reason the Canon BJC-4200 printer need be refilled using original firmware in case components become unstable due technical error messages on screen about how to fix them; as well if you receive errors pertaining specifically within third party programs like Adobe Photoshop CS6 update manager crashing while trying install recent updates available online
When printer errors, it can be frustrating to know what the cause of your problem may have been. Some people blame their computer and others believe that there is nothing wrong With them at all!The solution either way will involve trying different settings on both devices until you find one where everything works correctly again- or if none of these work try calling customer service for help resolving this issue as quickly as possible

Download Original Canon BJC-4200 Firmware for Windows:

– Original Canon BJC-4200 Firmware for Windows:

Download Canon BJC-4200 Firmware for Mac OS:

– Original Canon BJC-4200 Firmware for Mac OS:

Canon BJC-4200 User Manual

– A Canon BJC-4200 printer's User Manual is a guide that comes with the purchase of your device. It provides instructions on how to correctly configure, assemble and use it as well as information about troubleshooting problems should they occur – this makes sure you don't have call customer service!
– By using Canon BJC-4200 Manual, you can follow the instructions of the ebook and then you are able to fix errors code or common error like printer is unresponsive, bad print quality, printer won't scan, too many paper jams, prints too slowly, printing is too expensive, can't print from mobile device, Wi-Fi printing takes too long, disassembly or assembly of printer, Canon BJC-4200 maintenance, sensor errors, Canon BJC-4200 software problem, printer went problem, Canon BJC-4200 troubleshooting, printer cable connections inside the product, …
You can use our guide in order to understand all aspects of using this device including installation process and proper usage guidelines so that you never run into any issues while printing or configuring your machine!

Free watch and download Canon BJC-4200 User Manual

– Canon BJC-4200 User Manual for Windows:

– Canon BJC-4200 User Manual for MacOS:

[Quick guide] Fix Canon BJC-4200 error code list

– Code: E001-0000
– Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
– Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E001-0001
– Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
– Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E001-0003
– Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
– Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0000
– Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0001
– Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0002
– Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
– Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E003-0004
– Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
– Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

– Code: E004-0000
– Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
– Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).

– Code: E004-0001
– Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
– Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.

– Code: E009-0000
– Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
– Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.

– Code: E009-0001
– Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
– Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.

– Code: E009-0002
– Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
– Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon BJC-4200:

– Telegram: https://t.me/hyperaktiv
– Facebook: https://www.facebook.com/dngnm

Related sources:
https://dnasofts.com/epson-driver/
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
https://nguyendangnam.com/epson-driver
https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/